Online printing can be made easier with a wireless printer. In order to do so, a wireless printer is preferred.
You will need the WPS pin to set up your printer when you enable Wi-Fi direct on your device and choose 'WiFI Direct connection' from the 'printers and scanners' window on your device.
During that scenario, it is recommended to use the "Wireless Setup Wizard" or Control Panel to prepare the wireless connection.
Wireless Protected Setup is called WPS.
A WPS-enabled router allows you to locate your printer even without a computer or laptop. It is usually a question of finding the PIN and setting up the printer.
Here we explain how to set up the WPS PIN for the Printer.
The WPS pins are essential to brother printer cartridge PC501
Step 1:- Switch on the PC501 Brother printer.
Step 2:-Open the Control Panel then Access Menu
Step 3:-Select the network by clicking the Arrow image
Step 4 :-Then click OK after you've selected your network.
Step 5:- Afterwards, select the local area network by pressing the same arrow button
Step 6:- Click OK after that.
Step 7:-The pin code for WPS can be selected by pressing a similar arrow button
Step 8:- Once you have done this, click OK.
2. Where can I find a wps pin for my brother printer?
1. An LCD panel on your printer will show you this information.
2. Your device will begin to search for the access purpose as soon as it receives it.
3. In order to connect a computer to the network,
4. You will need to enter your pin in the WPS settings.
5. Simply follow the instructions onscreen to proceed.
6. Whenever you see the word "connected" on your LCD screen, you are connected.
7. A successful connection is the result of the router being able to connect to your device
8. It is possible to print wirelessly as well.
9. In the next few minutes, you'll receive an 8-digit pin code.
WPS PIN NOT WORKING ??
"WPS PIN not working" could be caused by a variety of reasons. It is possible that your printer cannot be connected to your network with WPS setup if you have entered the wrong PIN or if there are other issues..
.
The following steps can help you resolve this issue. Additionally, you can contact Brother Printer Support or go to a Brother service center.
Resolving issues requires these steps: -
Step 1 :- Connect the printer to your computer properly
Delete the WPS pin request window when you see it on your computer Step 2:-
Step 3:- Resetting the network settings on the printer might yield results.
Step 4:- Use the touchscreen display of the printer to easily navigate the settings. It depends on the model of your printer
Step 5:- To switch options, use the navigation buttons.
Step 6:- Navigate to Settings and select Network.
Step 7:-Select Network Reset and confirm by pressing OK.
Step 8: After a few moments, the printer will begin the resetting process.
Step 9: Upon receiving a confirmation request, tap OK again.
Step 10: Enter the WPS PIN to gain access to your network.
Step 11: You can now access the internet from your mobile device.
No comments:
Post a Comment