How important to set WPS Pin in brother pc501 ppf print cartridge

 

Online printing can be made easier with a wireless printer. In order to do so, a wireless printer is preferred.

You will need the WPS pin to set up your printer when you enable Wi-Fi direct on your device and choose 'WiFI Direct connection' from the 'printers and scanners' window on your device.

During that scenario, it is recommended to use the "Wireless Setup Wizard" or Control Panel to prepare the wireless connection.

Wireless Protected Setup is called WPS.

A WPS-enabled router allows you to locate your printer even without a computer or laptop. It is usually a question of finding the PIN and setting up the printer.

Here we explain how to set up the WPS PIN for the Printer.

The WPS pins are essential to brother printer cartridge PC501

1. Get WPS Pin:- 

• Step 1:- Switch on the PC501 Brother printer.

• Step 2:-Open the Control Panel then Access Menu

• Step 3:-Select the network by clicking the Arrow image

•  Step 4 :-Then click OK after you've selected your network.

• Step 5:- Afterwards, select the local area network by pressing the same arrow button

• Step 6:- Click OK after that.

• Step 7:-The pin code for WPS can be selected by pressing a similar arrow button

• Step 8:- Once you have done this, click OK.

2. Where can I find a wps pin for my brother printer?

1. An LCD panel on your printer will show you this information.
2. Your device will begin to search for the access purpose as soon as it receives it.
3. In order to connect a computer to the network,
4. You will need to enter your pin in the WPS settings.
5. Simply follow the instructions onscreen to proceed.
6. Whenever you see the word "connected" on your LCD screen, you are connected.
7. A successful connection is the result of the router being able to connect to your device
8. It is possible to print wirelessly as well.
9. In the next few minutes, you'll receive an 8-digit pin code.

WPS PIN NOT WORKING ??

 "WPS PIN not working" could be caused by a variety of reasons. It is possible that your printer cannot be connected to your network with WPS setup if you have entered the wrong PIN or if there are other issues.

.

.

The following steps can help you resolve this issue. Additionally, you can contact Brother Printer Support or go to a Brother service center.

Resolving issues requires these steps: -

Step 1 :- Connect the printer to your computer properly

Delete the WPS pin request window when you see it on your computer Step 2:-

Step 3:- Resetting the network settings on the printer might yield results.

Step 4:- Use the touchscreen display of the printer to easily navigate the settings. It depends on the model of your printer

Step 5:- To switch options, use the navigation buttons.

Step 6:- Navigate to Settings and select Network.

Step 7:-Select Network Reset and confirm by pressing OK.

Step 8: After a few moments, the printer will begin the resetting process.

Step 9: Upon receiving a confirmation request, tap OK again.

Step 10: Enter the WPS PIN to gain access to your network.

Step 11: You can now access the internet from your mobile device.

Issues that might occur during printer driver installation !!!

New hardware was not recognized by Your Window ??

Installing a printer not working for you?

Printer driver installation is one of the most important steps of printer 

shifting offline to online or printer connected to the internet. 

While installing printer drivers to our systems, we may face

 many issues regarding printer driver installation. Due to this printer

 working or showing offline 

You might think that their must be some issue in your printer or system 

but in actual there are some mistakes you did during your printer driver 

installation 

Some Of them are :-

Here are some common printer driver error messages

 you might see:

1. Windows Explorer has encountered a problem an

 needs to close. We are sorry for any inconvenience.

2. Spooler SubSystem App had Stopped working.

Issues that Occur During Printer Driver Installation 

1.The new hardware was not recognised by Windows :- This error occurs

 mostly in case either your printer driver is out-of-date or the printer driver

is installed incorrectly or has become corrupted. 

  2. The Printer Prints at an extremely Slow Rate:- For a variety of reasons, 

the printer begins printing very slowly. It depends on the printer model, as

 some printers create high-quality prints by printing at a significantly slower

rate. Other printer models print more quickly, but at a lower quality. Change

the print job's quality by going to the Print and Properties tab.

3. Printer Driver Problems:- There is not always a mistake of hardware,

sometimes software is also responsible for an issue occurring. Like in

this case your printer is outdated or needs some kind of update .This iss-

ue can be resolved just by simply updating your printer driver or reinstalling

your printer drivers. 

What can I do if my Printer Driver isn't operating ?

Resolve your printer driver issue using a driver management tool, install

the most recent Printer Driver.Or You can also Resolve your  printer

For this simply follow this steps:-

1.Open control panel 

2. Now, click on Hardware and Sound

3. Right-click the printer whose driver you need to install in Printers, 

and then choose Run as administrator.

4. Go to the Properties tab.

5. Select Advanced.

6. To instal the driver, go to the New Driver page and follow

 the onscreen instructions.

Install the most updated printer driver from the manufacturer:

 Just go to the printer manufacturer's website and look for the most

recent driver for your printer, which you can then download.

 

Follow instructions on the store's website to install the driver.

4. Hardware Issues :- But Sometimes there is no issue because 

of the software, but your hardware may be creating issues like:-

USB’s Might need Replacement :- 

It's possible that the issue isn't with your computer or printer

 at all. After long, connector cables such as USBs will weaken 

and burn out, needing their replacement. Unfortunately, they

don't have the same warning systems that your printer and 

computer do, so you'd never know if they died. Replace the 

printer cable with a different one.

Required some Printer Storage :- 

Modern printers are extremely complex machines. Most modern

 machines feature memory for storing print jobs, whether it's a few

 megabytes or many gigabytes in a large office Risograph. You've

 probably run out of memory if your printer is connected but printing

 at such a slow rate that it might as well not be.

5. The installed printer and your version of Windows are incompatible

 with the printer driver.

6. The printer driver is incorrectly installed.

7. Your printer driver files have been infected with malware.

 

Still An Issue Occurs?

Still problems occur??? Yet you are not able to resolve issues, even after following  

all these steps? Then you must Contact us for your issues resolvance. Our company

provides sales, support, and  maintenance services for all brands of printers,

and we have an exceptional track record for providing high-quality service

to our customers. For installation, service, or repair issues, our support team

is available 24/7