How important to set WPS Pin in brother pc501 ppf print cartridge

 

Online printing can be made easier with a wireless printer. In order to do so, a wireless printer is preferred.

You will need the WPS pin to set up your printer when you enable Wi-Fi direct on your device and choose 'WiFI Direct connection' from the 'printers and scanners' window on your device.

During that scenario, it is recommended to use the "Wireless Setup Wizard" or Control Panel to prepare the wireless connection.

Wireless Protected Setup is called WPS.

A WPS-enabled router allows you to locate your printer even without a computer or laptop. It is usually a question of finding the PIN and setting up the printer.

Here we explain how to set up the WPS PIN for the Printer.

The WPS pins are essential to brother printer cartridge PC501

1. Get WPS Pin:- 

• Step 1:- Switch on the PC501 Brother printer.

• Step 2:-Open the Control Panel then Access Menu

• Step 3:-Select the network by clicking the Arrow image

•  Step 4 :-Then click OK after you've selected your network.

• Step 5:- Afterwards, select the local area network by pressing the same arrow button

• Step 6:- Click OK after that.

• Step 7:-The pin code for WPS can be selected by pressing a similar arrow button

• Step 8:- Once you have done this, click OK.

2. Where can I find a wps pin for my brother printer?

1. An LCD panel on your printer will show you this information.
2. Your device will begin to search for the access purpose as soon as it receives it.
3. In order to connect a computer to the network,
4. You will need to enter your pin in the WPS settings.
5. Simply follow the instructions onscreen to proceed.
6. Whenever you see the word "connected" on your LCD screen, you are connected.
7. A successful connection is the result of the router being able to connect to your device
8. It is possible to print wirelessly as well.
9. In the next few minutes, you'll receive an 8-digit pin code.

WPS PIN NOT WORKING ??

 "WPS PIN not working" could be caused by a variety of reasons. It is possible that your printer cannot be connected to your network with WPS setup if you have entered the wrong PIN or if there are other issues.

.

.

The following steps can help you resolve this issue. Additionally, you can contact Brother Printer Support or go to a Brother service center.

Resolving issues requires these steps: -

Step 1 :- Connect the printer to your computer properly

Delete the WPS pin request window when you see it on your computer Step 2:-

Step 3:- Resetting the network settings on the printer might yield results.

Step 4:- Use the touchscreen display of the printer to easily navigate the settings. It depends on the model of your printer

Step 5:- To switch options, use the navigation buttons.

Step 6:- Navigate to Settings and select Network.

Step 7:-Select Network Reset and confirm by pressing OK.

Step 8: After a few moments, the printer will begin the resetting process.

Step 9: Upon receiving a confirmation request, tap OK again.

Step 10: Enter the WPS PIN to gain access to your network.

Step 11: You can now access the internet from your mobile device.

Issues that might occur during printer driver installation !!!

New hardware was not recognized by Your Window ??

Installing a printer not working for you?

Printer driver installation is one of the most important steps of printer 

shifting offline to online or printer connected to the internet. 

While installing printer drivers to our systems, we may face

 many issues regarding printer driver installation. Due to this printer

 working or showing offline 

You might think that their must be some issue in your printer or system 

but in actual there are some mistakes you did during your printer driver 

installation 

Some Of them are :-

Here are some common printer driver error messages

 you might see:

1. Windows Explorer has encountered a problem an

 needs to close. We are sorry for any inconvenience.

2. Spooler SubSystem App had Stopped working.

Issues that Occur During Printer Driver Installation 

1.The new hardware was not recognised by Windows :- This error occurs

 mostly in case either your printer driver is out-of-date or the printer driver

is installed incorrectly or has become corrupted. 

  2. The Printer Prints at an extremely Slow Rate:- For a variety of reasons, 

the printer begins printing very slowly. It depends on the printer model, as

 some printers create high-quality prints by printing at a significantly slower

rate. Other printer models print more quickly, but at a lower quality. Change

the print job's quality by going to the Print and Properties tab.

3. Printer Driver Problems:- There is not always a mistake of hardware,

sometimes software is also responsible for an issue occurring. Like in

this case your printer is outdated or needs some kind of update .This iss-

ue can be resolved just by simply updating your printer driver or reinstalling

your printer drivers. 

What can I do if my Printer Driver isn't operating ?

Resolve your printer driver issue using a driver management tool, install

the most recent Printer Driver.Or You can also Resolve your  printer

For this simply follow this steps:-

1.Open control panel 

2. Now, click on Hardware and Sound

3. Right-click the printer whose driver you need to install in Printers, 

and then choose Run as administrator.

4. Go to the Properties tab.

5. Select Advanced.

6. To instal the driver, go to the New Driver page and follow

 the onscreen instructions.

Install the most updated printer driver from the manufacturer:

 Just go to the printer manufacturer's website and look for the most

recent driver for your printer, which you can then download.

 

Follow instructions on the store's website to install the driver.

4. Hardware Issues :- But Sometimes there is no issue because 

of the software, but your hardware may be creating issues like:-

USB’s Might need Replacement :- 

It's possible that the issue isn't with your computer or printer

 at all. After long, connector cables such as USBs will weaken 

and burn out, needing their replacement. Unfortunately, they

don't have the same warning systems that your printer and 

computer do, so you'd never know if they died. Replace the 

printer cable with a different one.

Required some Printer Storage :- 

Modern printers are extremely complex machines. Most modern

 machines feature memory for storing print jobs, whether it's a few

 megabytes or many gigabytes in a large office Risograph. You've

 probably run out of memory if your printer is connected but printing

 at such a slow rate that it might as well not be.

5. The installed printer and your version of Windows are incompatible

 with the printer driver.

6. The printer driver is incorrectly installed.

7. Your printer driver files have been infected with malware.

 

Still An Issue Occurs?

Still problems occur??? Yet you are not able to resolve issues, even after following  

all these steps? Then you must Contact us for your issues resolvance. Our company

provides sales, support, and  maintenance services for all brands of printers,

and we have an exceptional track record for providing high-quality service

to our customers. For installation, service, or repair issues, our support team

is available 24/7

How to attach an Offline printer to the internet

 It’s very easy to get a printer working using a USB or Cables (wires).

By Using Cables you just need to plug one end of the wire into the printer and another end to the computer. But Bringing a printer online means that documents can be printed without a direct computer connection, by connecting it to the WI-FI Network or Ethernet. 

When You are talking about the offline shifting of the printer to online, the First thing should come in your mind is:- 

Have you Done Your Printer Installation?

Yes, While shifting an offline printer to an online printer you need to first install a printer driver on your computer, that’s called "PRINTER INSTALLATION".

 If not, you may face the problem that your printer still works as an offline printer, even after connecting your printer to WiFi or the Ethernet.

Steps to Install Printer driver to your computer 

1. Click on START and open the control panel

 

2. In Control Panel, double click on Devices and printer option

                      

3. In Devices and Printer option, Click on “Add a Printer”

4. Now you have a choice between a Local Network Printer and a wireless printer. Select Local Network Printer and then click Next.   

             

               

        5. Now you have two ports, Select an existing port or create a new port and then click Next

                 

6. Click Have Disk, to install the driver from a configured CD

7. Now, Enter the printer driver location, browse to the directory of your drivers

                 

          Now the question arises how do I find a printer driver.

You can usually find the drivers on the manufacturer's website if you don't have the disc. Printer drivers are often found on the website of your manufacturer under "downloads" or "drivers." Download driver to run the driver file

Now Second Step is to shift an offline printer to online, for this, you have two types of connectivity:-

1. Through WIFI Network

Step 1.

For the WIFI network connective first, you should connect

the printer to the same wifi network as your computer has.    

Step2. Use a simple printer menu to access the WI-FI networks that are available.

Ensure that you connect to the correct network.

Step 3. Now, Return to your computer and check whether the printer is connected to

the network or not.

Start to Print your document

                       

2. Through Connecting Ethernet

Step1.Connect the end of an Ethernet cable on the back of the printer towards

the Ethernet port and connect the second cable end to the router port.

Step 2.

Switch on the printer

Step 3.

Install the software using the configured CD

Step 4. 

Now, enter the IP address of your computer showing in the IP address configuration  

Step 5.

Now, search for your printer in the  available network  devices

Step 6.

The last step is to reboot your computer to complete the installation

The same procedure can be followed to attach different brands of printers such as 

HP Printers, Brother printers, Epson printers, etc, to the internet to make them

work online.